Some problems still occur on the geometry. Cleanup in Space Claim.

Meshing parameter:

element size 700mm

Initial named selection only inlet, outlet, wall and plane

curvature normal angle, change from 18 to 10 degree.

The other paremeters were set to default.

Problem occurs: intersection faces on the vertical stabilize on the joint to fuselage, results in small faces

Countermeasure: cleanup the excess faces at base of the vertical stabilizer. Delete adjoining faces at the fuselage – repair with missing faces on space claim.

Meshing faces reduced from 602 to 587. Initializing meshing

  • Enclosure distance from plane (plane length is B) : 15B=255m and 30B=510m